No results were found for the filter!
Hexagon Hotend Set for 3mm Filament Hexagon Hotend Set for 3mm Filament The Hexagon Hotend set for 3mm is the ideal supplemental for your RepRap 3d printer like Mendel, Prusa, Ordbot Hadron, sparkcube or similars. Product content: 1x Hexagon hotend for 3mm filament 1x...
€46.95 *
NTC Thermistor with wire, 100k, Beta = 3950, 1... NTC Thermistor with wiring, 100k, Beta = 3950, 1 piece The thermistor is preconfigured with a wire of around 1m length. Therefore the thermistor is already soldered to the cable and isolated. A connector has to be soldered only at the...
€2.80 *
Hexagon Nozzle 0.4mm, 1.75mm Filament Hexagon Hotend Nozzle 0.4mm diameter, 1.75mm Filament Hotend Nozzle with a diameter of 0.4mm for the Hexagon Hotend for 1.75mm filament.
€7.50 *
Hexagon Nozzle 0.5mm, 1.75mm Filament Hexagon Hotend Nozzle 0.5mm diameter, 1.75mm Filament Hotend Nozzle with a diameter of 0.5mm for the Hexagon Hotend for 1.75mm filament.
€7.50 *
PCB MK2B R1 Dual Power Heatbed PCB MK2b R1 Dual Power Heat Bed PCB Heat Bed MK2b usable with 12V and 24V Dimensions: 214mm x 214mm SMD Leds presoldered for control recommended permanent heating 120°C Powersupply 12V and 24V selectable by connectors based on the MK2A...
€17.90 *
Silicon rubber heat bed 180W - 12V - 200x200mm Silicon rubber heat bed 180W - 12V - 200x200mm The self taping silicon rubber heat pad with a power dissipation of 180W at 12V. Compared to the commonly used PCB heat beds, this silicon rubber heat pad will reach the desired temperature...
€42.90 *
Silicon rubber heat bed 180W - 24V - 200x200mm Silicon rubber heat bed 180W - 24V - 200x200mm The self taping silicon rubber heat pad with a power dissipation of 180W at 24V. Compared to the commonly used PCB heat beds, this silicon rubber heat pad will reach the desired temperature...
€42.90 *
Bulldog Lite Extruder for 1.75mm Filament Bulldog Lite Extruder for 1.75mm Filament symetric design (you can mount motor motor left or right side) additional 6mm inner screw thread fully assembled and tested full metal extruder grove mount compatible hotend holder stable and...
€89.50 *
Hexagon Thermoblock Hexagon Thermoblock The thermal block fits for the 1.75mm and 3mm Hexagon Hotend from Reprapdiscount.
€9.10 *
Hexagon silicone jacket Hexagon silicone jacket The silicone jacket stabilizes the temperature within the thermal block by isolating the block. Thurthermore it avoids messing the block with remains of filament.
€8.50 *
J-Head Hotend, 1.75mm Filament, 0,3mm Nozzle J-Head Hotend for 1.75mm filament with 0.3mm nozzle J-Head Hotend for 1.75mm filament and 0.3mm nozzle Heat cartrigde 12V ~40W, 6mm diameter, 20mm length Thermistor NTC 100K B=3950 preassembled with around 1m wires
€39.90 *
Hotend mounting bracket, ALU Mounting bracket for hotends like J-Head Mounting bracket to assemble hotends at the X-axis carriage Note: This mounting bracket is needed to assemble hotends togehter with an extruder like Wades, if it's not already part of the Extruder...
€9.90 *
Viewed