No results were found for the filter!
Stepper motor NEMA 17 - 4000g*cm NEMA 17 stepper motor, model 17HS4417 NEMA 17 stepper motor with a stepangle of 1,8° and a holding torque of 4000g*cm. Product contents: 1 x NEMA 17 stepper motor, model 17HS4417
€12.90 *
Coupler 5mm/8mm ALU Axis Coupler 5mm/8mm 1x ALU Coupler 5mm to 8mm set screws Dimensions Outerdiameter 19mm Hight around 25mm Bore 5mm Bore 8mm
€5.90 *
GT2 Pulley, 20 teeth, 5mm bore GT2 Pulley with 20 teeth for GT2 belt, for 5mm shaft 1x GT2 Pulley with 20 teeth matching for 5mm stepper motor shaft 2x set screws
€3.80 *
Timing belt GT2, 6mm width, 1m GT2 timing belt, 6mm width, 1m 1 meter GT2 timing belt, open Width 6mm Pitch 2mm
€4.90 *
Ball bearing 608 2RS Ball bearing 608 2RS The ball bearing type 608 is used in 3d printers typically in the extruder (e.g. Gregs Wades) or as idler for the timing belt. inner diameter: 8mm outer diameter: 22m height: 7mm Delivery contents: 1x 608 2RS ball...
€0.95 *
Linear bearing LM8UU Linear bearing LM8UU Linear bearings LM8UU are perfect for use in a machine with 8mm rods. The linear breaings provide optimal sliding properties along the axes and thus enhance the lifetime and the precision of the printer. inner...
€0.95 *
Axis Coupler 5mm/5mm ALU Axis Coupler 5mm/5mm 1x ALU Coupler 5mm to 5mm set screws Dimensions Outerdiameter 19mm Hight around 25mm Bore 5mm Bore 5mm
€5.90 *
Linear bearing LM10UU Linear bearing LM10UU Linear bearings LM10UU are perfect for use in a machine with 10mm rods. The linear breaings provide optimal sliding properties along the axes and thus enhance the lifetime and the precision of the printer. inner...
€1.95 *
Linear bearing SC8UU Linear bearing SC8UU Linear bearings SC8UU are perfect for use in a machine with 8mm rods. The linear breaings provide optimal sliding properties along the axes and thus enhance the lifetime and the precision of the printer.
€2.95 *
Linear bearing SCL8UU (long) Linear bearing SCL8UU (long) Linear bearings SCL8UU are perfect for use in a machine with 8mm rods. The linear breaings provide optimal sliding properties along the axes and thus enhance the lifetime and the precision of the printer.
€4.45 *
Aluminium MK3 Dual Power Heatbed Aluminium MK3 Dual Power Heatbed Aluminium Heatbed MK3 usable with 12V and 24V Dimensions: 214mm x 214mm includes Thermistor 100K B=3950 recommended permanent heating 120°C Powersupply 12V and 24V selectable by connectors based on the...
€29.50 *
Hobbed M8 Bolt for Wade's Extruder Hobbed Bolt for 3D Printing / Prusa / Mendel / RepRap / M8 M8 x 60 Hobbed Bolt for Reprap Greg's Wade extruder, and other common 3D Printer extruder designs
€4.95 *
Viewed