Products from Reprapdiscount

Hexagon Hotend Set for 1.75mm Filament The Hexagon Hotend set for 1.75mm is the ideal supplemental for your RepRap 3d printer like Mendel, Prusa, Ordbot Hadron, sparkcube or similars. Product content: 1x Hexagon hotend 1x Nozzles 0.4mm...

Bulldog Extruder XL for 3mm and 1,75mm Filament symetric design (you can mount motor motor left or right side) additional 6mm inner screw thread fully assembled and tested full metal extruder grove mount compatible hotend holder stable...

RRD Fan Extender for RAMPS 1.4 The RRD Fan Extender for RAMPS 1.4 will be needed if you use your RAMPS 1.4 with Dual-Extruder and all standard outputs D8/D9/D10 are already occupied. Package content: 1x RRD fan extender (assembled and...

Hexagon Hotend Nozzle 0.3mm diameter, 3mm Filament Hotend Nozzle with a diameter of 0.3mm for the Hexagon Hotend for 3mm filament.

Hexagon Hotend Nozzle 0.4mm diameter, 3mm Filament Hotend Nozzle with a diameter of 0.4mm for the Hexagon Hotend for 3mm filament.

Hexagon Hotend Nozzle 0.5mm diameter, 3mm Filament Hotend Nozzle with a diameter of 0.5mm for the Hexagon Hotend for 3mm filament.

Hexagon Hotend Nozzle 0.3mm diameter, 1.75mm Filament Hotend Nozzle with a diameter of 0.3mm for the Hexagon Hotend for 1.75mm filament.

Hexagon Hotend Set for 3mm Filament The Hexagon Hotend set for 3mm is the ideal supplemental for your RepRap 3d printer like Mendel, Prusa, Ordbot Hadron, sparkcube or similars. Product content: 1x Hexagon hotend for 3mm filament 1x...

Hexagon Hotend Nozzle 0.4mm diameter, 1.75mm Filament Hotend Nozzle with a diameter of 0.4mm for the Hexagon Hotend for 1.75mm filament.

Hexagon Hotend Nozzle 0.5mm diameter, 1.75mm Filament Hotend Nozzle with a diameter of 0.5mm for the Hexagon Hotend for 1.75mm filament.

RRD Hall-Endstop with 2 magnets The Hall Endstop enables an easy inductive detection of the endstop position of your 3D printer. When assembling the magnet at your printer you must take care of the magnet polarity! The hall sensor only...

Bulldog Lite Extruder for 1.75mm Filament symetric design (you can mount motor motor left or right side) additional 6mm inner screw thread fully assembled and tested full metal extruder grove mount compatible hotend holder stable and...